Last updated on 21st October 2026 by ProGuard Exteriors

ProGuard Exteriors recently completed a distinctive Spray Cork wall coating transformation in Oxford as an alternative to house render, applying the coating system across three different exterior surfaces: cladding, brickwork and concrete roof tiles. Using three complementary colours, Earth, Blush and Slate, the project gave the Oxford property a coordinated new appearance while retaining the character and visible texture of its original materials.

Overview

This Spray Cork wall coating project was completed on a property in Oxford , where the exterior featured a combination of cladding, traditional brick-faced elevations and concrete roof tiles. Rather than using a single coating colour across the entire Oxford property, the project involved selecting different CorkSol finishes to complement each surface and create a more unified overall appearance.

The aim was to refresh the exterior while maintaining the distinctive characteristics of the existing materials. The cladding, brickwork and roof tiles each required their own preparation and finishing approach to ensure the CorkSol coating system was suitable for the different substrates.

Three complementary colours were selected for the transformation: Earth for the external cladding, Blush for the brickwork and Slate for the concrete roof tiles. Together, these finishes created a coordinated colour scheme designed to complement the property while preserving the visible outlines and texture of the existing brickwork.

Our Response

ProGuard Exteriors approached the project by preparing each exterior surface individually before applying the CorkSol Spray Cork coating system. This was particularly important because the cladding, brickwork and concrete roof tiles presented different substrates requiring appropriate preparation and priming before the final coatings could be installed.

For the external cladding, our team applied a primer to prepare the surface before spraying CorkSol directly over the top in the colour Earth. This created a natural-looking finish that complemented the Oxford property and formed the first part of the coordinated exterior transformation.

Across the brick-faced elevations, existing pointing was repaired before the brickwork was primed and coated with CorkSol in Blush. By applying the Spray Cork directly over the bricks, the original outlines and texture of the brickwork remained visible beneath the coating, helping retain the character of the Oxford property while introducing a refreshed decorative finish.

The concrete roof tiles were also primed and sprayed with CorkSol, this time in the colour Slate. The charcoal grey shade was selected to create the appearance of natural slate roofing, providing a complementary contrast to the Earth-coloured cladding and Blush-coated brickwork.

By using CorkSol across all three exterior materials, ProGuard Exteriors were able to bring the different surfaces together visually while maintaining their individual characteristics and supporting the homeowner’s energy-efficiency goals.

The gallery above showcases this Oxford Spray Cork transformation, including CorkSol applied to external cladding in Earth, repaired and coated brickwork in Blush, and concrete roof tiles finished in Slate to create a coordinated exterior appearance.

Final Specification

Surface-Specific Preparation: The cladding, brickwork and concrete roof tiles were individually prepared to ensure the CorkSol coating system could be applied appropriately to each exterior material.

External Cladding Priming: The external cladding was primed before applying CorkSol directly over the prepared surface.

CorkSol Cladding Finish in Earth: The cladding was sprayed with CorkSol in Earth, creating a natural-looking finish that complements the property’s exterior.

Brick Pointing Repairs: Existing pointing across the brick-faced elevations was repaired before the brickwork was prepared for the CorkSol application.

Brickwork Priming: The brickwork was primed to provide a suitable prepared surface before the Spray Cork coating was applied.

CorkSol Brickwork Finish in Blush: CorkSol was sprayed directly over the brickwork in Blush, retaining the visible outlines and texture of the existing bricks while giving the elevations a refreshed appearance.

Concrete Roof Tile Preparation: The existing concrete roof tiles were primed before receiving their CorkSol coating finish.

CorkSol Roof Tile Finish in Slate: The concrete roof tiles were sprayed with CorkSol in Slate, a charcoal grey colour selected to create the appearance of natural slate roofing.

Coordinated Exterior Colour Scheme: Earth, Blush and Slate were used across the different exterior materials to achieve three complementary finishes and a more unified overall appearance.

Benefits Achieved

The completed project refreshed the exterior of the Oxford property by using three carefully selected CorkSol colours across its cladding, brickwork and roof tiles. This approach created a coordinated appearance while allowing the existing character and texture of the different materials to remain part of the finished design.

Coordinated Exterior Appearance: Three complementary CorkSol finishes brought the cladding, brickwork and roof tiles together to create a more consistent and visually connected exterior.

Natural-Looking Cladding Finish: The Earth-coloured CorkSol coating created a natural appearance across the cladding, complementing the Oxford property’s existing features.

Retained Brickwork Character: Applying CorkSol directly over the brickwork allowed the original brick outlines and texture to remain visible beneath the Blush finish.

Refreshed Roof Tile Appearance: The Slate-coloured coating gave the existing concrete roof tiles a charcoal grey finish designed to resemble natural slate roofing.

Brick Pointing Improvements: Existing pointing defects were addressed before the CorkSol coating was applied, ensuring the brickwork received the required preparation.

Versatile Spray Cork Application: The project demonstrated how CorkSol can be applied across different prepared exterior substrates as part of a coordinated property refurbishment.

Energy-Efficiency Considerations: The use of CorkSol supported the homeowner’s energy-efficiency goals while allowing the different exterior materials to receive a coordinated decorative finish.

Why Use ProGuard Exteriors

Exterior coating projects involving multiple materials require careful preparation and an approach tailored to each surface. For this Oxford property, ProGuard Exteriors applied CorkSol across cladding, brickwork and concrete roof tiles, selecting the appropriate preparation method and finish for each area.

Tailored Surface Preparation: Each material was prepared individually before the CorkSol system was applied, including priming to the cladding, brickwork and concrete roof tiles.

Attention to Existing Details: The brickwork pointing was repaired before coating, while the Spray Cork application retained the visible texture and outlines of the original brickwork.

Complementary Colour Selection: Earth, Blush and Slate were used to create a cohesive colour scheme across the property’s different exterior surfaces.

Versatile CorkSol Expertise: The project involved applying Spray Cork to three different prepared exterior materials, demonstrating a tailored approach to achieving a consistent overall transformation.

Why It Matters

Not every exterior refurbishment involves a single wall material or a uniform finish. Properties combining cladding, brickwork and roof tiles often require individual preparation and carefully considered colour choices to achieve a balanced overall appearance.

This Oxford project demonstrates how CorkSol Spray Cork can be used to refresh different exterior materials while preserving important features such as the visible texture of brickwork. By combining Earth-coloured cladding, Blush-coated bricks and Slate-finished roof tiles, ProGuard Exteriors created a coordinated new appearance that complements the property’s original character.

The completed transformation highlights the versatility of Spray Cork coating systems for homeowners looking to refresh their exterior while supporting broader property improvement and energy-efficiency goals.

Request a free site survey and no-obligation quote today to see how ProGuard Exteriors can transform your Oxford property with CorkSol Spray Cork coatings.

ProGuard Exteriors provide CorkSol Spray Cork coatings, exterior wall coatings, brickwork coatings, roof coatings, rendering and exterior property refurbishment solutions across Oxfordshire and surrounding areas.

Whether you’re located in Oxford, Headington, Cowley, Marston, Wheatley, Kidlington, Botley or nearby areas, our expert service makes us your go-to choice for Oxford wall coatings and professional exterior property transformations.

Contact our team to discuss CorkSol Spray Cork applications, exterior wall coatings, external wall insulation and complete exterior refurbishment solutions throughout Headington, Oxford and the surrounding areas.