Last updated on 30th September 2026 by ProGuard Exteriors

ProGuard Exteriors completed a CorkSol insulated wall coating project in Sandhurst, Berkshire, for a homeowner who wanted to refresh and protect the front elevation of their property. The upper section had started to show signs of deterioration, including blown paint and minor cracking, so a careful repair and coating approach was required.

Overview

The property’s front elevation needed attention after the upper section began to deteriorate. Although this was a smaller repair and coating project, the preparation stage remained essential to ensure the new CorkSol insulated coating system could achieve a clean, consistent and long-lasting finish.

The homeowner wanted to improve the appearance of the front elevation while also helping protect the surface from everyday weather exposure. ProGuard Exteriors assessed the affected areas to identify where the existing coating had failed and where repairs were needed before the new spray cork wall coating could be applied.

Our Response

The top half of the front elevation was carefully prepared before coating. Blown paint was removed and minor cracks were repaired to create a more stable surface for the new system. This preparation helped address the visible problem areas and provided a better base for the finished coating.

Once the repair works were complete, the walls were fully primed to support adhesion and create a suitable base for the insulated coating system. ProGuard Exteriors then sprayed three coats of CorkSol insulated coating in the customer’s chosen colour, Cotton, creating a softer, fresher and more uniform finish across the front elevation.

The gallery above showcases this Sandhurst CorkSol insulated wall coating project, including preparation of the upper front elevation, removal of blown paint, minor crack repairs, full priming, and three coats of CorkSol in Cotton.

Final Specification

Affected Area Assessment: The front elevation was assessed to identify where the existing coating had failed and where repairs were required.

Blown Paint Removal: Blown paint was removed from the upper section of the front elevation to create a more stable surface.

Minor Crack Repairs: Minor cracks were repaired before coating to help prepare the surface correctly.

Full Priming: The walls were fully primed to support adhesion and provide a suitable base for the CorkSol system.

CorkSol Insulated Coating: Three coats of CorkSol insulated coating were sprayed in the customer’s chosen colour, Cotton.

Benefits Achieved

The completed works delivered a cleaner, brighter and better protected front elevation while improving the consistency and appearance of the property’s exterior finish.

Fresh, Softer Appearance: The Cotton CorkSol finish created a cleaner and more uniform look across the front elevation.

Repaired Problem Areas: Blown paint and minor cracking were addressed before the insulated wall coating was applied.

Improved Kerb Appeal: The front of the property now has a brighter, more consistent and well-maintained appearance.

Durable CorkSol Finish: The breathable, flexible and insulated spray cork wall coating helps protect the exterior from everyday weather exposure while reducing future maintenance.

Why Use ProGuard Exteriors

Even smaller exterior coating projects require careful preparation to ensure the finished surface looks right and performs as intended. ProGuard Exteriors managed the repair, priming and CorkSol application process to provide a clean and reliable finish.

Careful Inspection: The affected areas were assessed before work began to identify failed coating and minor cracking.

Proper Preparation: Blown paint was removed, cracks were repaired and the walls were fully primed before coating.

Consistent Application: Three coats of CorkSol were sprayed to help create a more uniform finish across the front elevation.

Long-Term Protection: The finished CorkSol system was selected to refresh and protect the exterior while reducing future maintenance needs.

Why It Matters

When exterior coatings begin to fail, blown paint and minor cracking can quickly affect both appearance and protection. By preparing the surface correctly, repairing problem areas, applying primer and finishing with three coats of CorkSol in Cotton, this Sandhurst project delivered a clean, durable and better protected front elevation.

Request a free site survey and no-obligation quote today to see how ProGuard Exteriors can support your next spray cork wall coating project.

ProGuard Exteriors provide CorkSol insulated wall coatings, spray cork finishes, render repairs and exterior wall coating services for homes requiring durable external refurbishment.

Whether you’re located in Sandhurst, Bracknell, Crowthorne, Wokingham, Camberley, Yateley, Blackwater or nearby areas, our expert service makes us your go-to choice for CorkSol insulated wall coatings and exterior renovation solutions.

Contact our team to discuss CorkSol spray cork coatings, cracked wall repairs and exterior coating projects across Sandhurst and surrounding areas.